TL;DR
- A standard RV inspection takes 2 to 4 hours depending on rig size and condition.
- Pre-purchase inspections often run closer to 3 to 4 hours due to deeper system checks.
- Pricing ranges from $150 for a basic safety check to $400 for a full pre-purchase inspection.
- Same-day and next-day appointments are often available across Palm City and Martin County.
- Florida's heat, humidity, and salt air can reveal extra issues that extend inspection time.
Most RV inspections at Treasure Coast RV Repair take 2 to 4 hours, though that window can stretch depending on your rig's size, age, and what we find along the way. If you're shopping for a used coach near Palm City or just want your annual safety check before heading to Jonathan Dickinson State Park for the season, knowing what to expect upfront saves you time and stress.
Our team, led by Danny Vasquez with 13+ years of RVIA-certified experience, has completed over 4,100 repairs across St. Lucie, Martin, and Indian River counties. We've learned that Florida's climate, especially the heat, humidity, and salt air common throughout Martin County, adds inspection steps that don't always apply up north. This guide gives you straight answers on timing, what slows things down, and how to get on our schedule fast.
How Long Does an RV Inspection Service Actually Take?
For a standard RV inspection service, plan on 2 to 3 hours for travel trailers and smaller Class C motorhomes. Larger Class A diesel pushers or fifth wheels can run 3 to 4 hours simply because there's more ground to cover. That time includes checking the roof, slide-outs, electrical panels, propane systems, and every major appliance on board.
A pre-purchase inspection typically lands at the longer end of that range. We're going deeper on those calls because you're making a buying decision that could involve tens of thousands of dollars. We use a calibrated moisture meter to probe walls, floors, and ceiling joints for hidden water intrusion, and we run a propane safety test on every burner and fitting.
Annual inspections that follow RVIA guidelines and NFPA 1192 standards tend to move faster when the rig has a clean history. If we find something during the walk-through, like a soft spot on the roof or a tripped GFCI that keeps resetting, we'll stop, show you exactly what we found, and give you options before moving on.
What Causes an RV Inspection to Take Longer Than Expected?
The biggest time-extenders we run into near Palm City and across the Treasure Coast come down to three things: Florida's climate damage, deferred maintenance, and older electrical systems. UV exposure in South Florida is brutal on roof membranes and sealants. When a roof hasn't been resealed in a few seasons, we often find multiple soft spots that each need moisture meter readings, photos, and documentation.
Slide-out rooms add meaningful time to any inspection. Each slide has its own seals, travel arms, and electrical or hydraulic actuators that need to be cycled and checked under RVIA guidelines. A coach with three or four slides can add 30 to 45 minutes on its own.
We also see delays when an RV's electrical panel shows signs of modifications done outside of NEC Article 551 standards. That's the national code that governs RV electrical systems, and when previous owners or unlicensed shops have added circuits without following it, we have to document every deviation carefully. It protects you as the buyer or owner, but it does take extra time.

We Come to You Across Martin County
Our mobile inspection service means you don't have to tow or drive your rig to a shop. We bring the tools, the moisture meter, and 13+ years of hands-on experience directly to your driveway, campground, or dealership lot anywhere in or around Palm City. That alone eliminates the transit time that eats into most people's schedules.
Because we're already set up for mobile work, our arrival-to-completion window is tighter than you'd expect from a traditional shop visit. You stay home, we handle the inspection, and you get a full written report before we leave.
Pro Tip: Do This Before We Arrive
Have your RV plugged into shore power and your propane tanks at least half full before your appointment. We need live power to test appliances, outlets, and the HVAC system, and we need propane to run the burner and furnace tests required under NFPA 1192. Showing up ready shaves 20 to 30 minutes off your inspection window and gets you back to your day faster.
Emergency vs. Scheduled RV Inspections: What's the Difference?
A scheduled inspection is what most Palm City RV owners book a few days out. You pick a time slot, we confirm, and everything runs in a planned sequence. These appointments tend to go smoothly because both sides are prepared. Pricing for scheduled inspections runs $150 to $400 depending on the scope, and you can read more about what drives those numbers in our RV Repair Cost Guide for the Treasure Coast.
Emergency inspections are a different conversation. If you just bought a rig sight-unseen and it arrived with mystery water stains, or if your propane detector went off overnight at a campground, we treat that as a priority call. We'll do our best to get someone out the same day. Emergency calls may carry a priority service fee on top of the base inspection cost, and the timeline for arrival depends on our current route and location.
The honest answer is that same-day availability exists across the Treasure Coast, but it's not guaranteed. Calling early in the morning at (772) 677-1583 gives you the best shot at a same-day slot.
| Inspection Type | Typical Duration | Price Range |
|---|---|---|
| Basic Safety Check | 1.5 to 2 hours | $150–$200 |
| Annual Maintenance Inspection | 2 to 3 hours | $200–$275 |
| Pre-Purchase Inspection | 3 to 4 hours | $300–$400 |
| Water Damage Assessment (Add-On) | 30 to 60 min added | $75–$125 added |
| Propane Safety Test (Standalone) | 45 to 60 min | $100–$150 |
Pricing Disclaimer
All prices shown are estimates based on national averages and our service history. Actual costs may vary depending on current market conditions, parts availability, your specific RV model, and the scope of work required. The only way to determine your final cost is through an on-site diagnosis by our certified technician. Call (772) 677-1583 for a free estimate.
Same-Day RV Inspection Availability on the Treasure Coast
We serve 16 cities across St. Lucie, Martin, and Indian River counties, which means our route is already running through the Treasure Coast on most weekdays. Palm City sits right in the middle of our Martin County coverage area, so it's rarely a long detour to get there. When a slot opens up, Palm City and surrounding communities are easy to reach.
Same-day availability is most common during the mid-week stretch, Tuesday through Thursday. Weekends and Mondays tend to fill fast, especially during snowbird season when out-of-state buyers are shopping RVs and need pre-purchase inspections before flying home. If you're reading this in late fall or early spring, book earlier than you think you need to.
The best move is to call (772) 677-1583 directly rather than using an online form if you need same-day service. Danny Vasquez and our dispatch team can check the live schedule and tell you immediately what's available instead of making you wait on a callback.

What We're Actually Checking in That Time
A lot happens inside a 2 to 4 hour inspection window. The electrical panel check alone, where we verify compliance with NEC Article 551 and look for overloaded circuits, reversed polarity, or amateur wiring, can take 20 to 30 minutes on an older coach. You can see a breakdown of what goes into a pre-purchase appointment in our Complete RV Pre-Purchase Inspection Guide.
We also run a full roof assessment on every inspection, which matters more in Palm City than it would in, say, Minnesota. Florida's UV index is consistently among the highest in the country, and rubber and TPO roofs degrade faster here. If you want to understand why, our post on UV damage and RV roofs in South Florida covers it in detail.
Why Florida's Climate Adds Time to Every RV Inspection
Salt air from the coast, extreme UV, and high year-round humidity are the three conditions that make a Treasure Coast RV inspection different from a routine check in a drier climate. We've been doing this since 2013 and we've watched these elements do real damage to rigs that looked fine on the outside. That's why our moisture meter is one of the first tools we pull out, not the last.
Humidity works its way into wall cavities through micro-cracks in sealant that you'd never see with the naked eye. By the time you spot bubbling wallpaper or soft flooring, the damage behind it has usually been building for a season or two. Catching it early with a moisture meter reading during a scheduled inspection service costs a fraction of what full delamination repair runs later.
UV damage is the other Florida-specific issue that slows inspections down. Faded or cracked roof coatings, brittle slide-out seals, and sun-damaged sealant around every window and vent need individual attention. We don't rush that part because missing a compromised seal in a Palm City summer is a fast path to a much bigger repair bill.
Questions about rv inspection service on the Treasure Coast? Call (772) 677-1583 and ask for Danny. Free estimates, same-day service available.